Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Key Battery for the Toyota C-HR

Model: Toyota C Hr Ax10, MK 1, Ax50 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Key

See other generations:
Video tutorial

If you need to replace the battery in your Toyota C-HR key yourself, follow the procedure described below step by step. First, purchase a new button battery (model CR1620), then take the car remote and remove the physical emergency key from inside the cover.

Next, remove the rear cover and use a flat screwdriver to take out the battery holder. Finally, replace the old battery with the new one.


Updated on 20 October 2026 by ScegliAuto


Related tutorials

Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) To replace the remote control battery on a Toyota C-HR, press the button on the top of the device to extract the key from its housing. Once the key i…
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) Today’s steps will guide you on how to remove and replace the battery in a Toyota C-HR by following these simple instructions. First, open the bonnet…
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) If you need to replace the battery in your 2017 Toyota C-HR key but don’t know how to do it, follow the steps in this guide. First, take a flat screw…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos