Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Toyota C-HR

Model: Toyota C Hr Ax10, MK 1, Ax50 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Battery

See other generations:
Video tutorial

Today’s steps will guide you on how to remove and replace the battery in a Toyota C-HR by following these simple instructions. First, open the bonnet of the vehicle and disconnect both battery terminals (positive and negative).

Then, use a socket spanner to unscrew the battery bracket screw and remove it, as shown in the video. At this point, install the new suitable battery of the correct type and with the same amperage; insert it in the correct orientation to connect the battery electrically!


Updated on 30 August 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery in a Toyota C-HR?
How to Replace the Remote Battery in a Toyota C-HR?
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) To replace the battery in a Toyota C-HR remote, move the tab located at the bottom of the remote to extract the key from its housing. By levering her…
How to Replace the Key Battery of the Toyota C-HR?
How to Replace the Key Battery of the Toyota C-HR?
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) The battery for the Toyota C-HR key is a CR1620. To replace the key battery, first, gently pry with a flat-head screwdriver in the designated slot wh…
How to Replace the Key Battery for the Toyota C-HR
How to Replace the Key Battery for the Toyota C-HR
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) If you need to replace the battery in your Toyota C-HR key yourself, follow the procedure described below step by step. First, purchase a new button …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos