Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery of the Toyota C-HR?

Model: Toyota C Hr Ax50, MK 1, Ax10 - Years 2016-2023
Part: Key

The battery for the Toyota C-HR key is a CR1620. To replace the key battery, first, gently pry with a flat-head screwdriver in the designated slot where the keyring attachment is located. Once the top part of the shell is removed, you will need to take out the battery cover, which requires prying outward with the screwdriver used to remove the top part of the shell, applying enough pressure. At this point, to remove the battery, press the hole located beneath the battery with a precision screwdriver or a paperclip. The battery will pop out and can be replaced. Once the battery is replaced, simply refit the battery cover and the shell, pressing to secure them properly.

Updated on 24 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the battery of a Toyota C-Hr key?
How to change the battery of a Toyota C-Hr key?
Toyota C Hr (2016-2023 / Ax50, MK 1, Ax10) To change the battery of a Toyota C-HR key, start by removing the emergency mechanical key. To do this, press the release button located on the side …
How to Replace the Key Battery of the Toyota CH-R
How to Replace the Key Battery of the Toyota CH-R
Toyota C Hr (2016-2023 / Ax50, MK 1, Ax10) To replace the key battery of the Toyota CH-R, start by sliding the tab at the bottom of the remote to remove the key blade. Once the key blade is re…
How to replace the battery of the Toyota C-HR 2017 key.
How to replace the battery of the Toyota C-HR 2017 key.
Toyota C Hr (2016-2023 / Ax50, MK 1, Ax10) If you need to replace the battery in the key of your 2017 Toyota C HR, but you don't know how to do it, then all you have to do is pay attention to …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos