Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Toyota C-HR 2017 key.

Model: Toyota C Hr Ax50, MK 1, Ax10 - Years 2016-2023
Part: Key

If you need to replace the battery in the key of your 2017 Toyota C HR, but you don't know how to do it, then all you have to do is pay attention to the steps in the following guide. First of all, take a flathead screwdriver and use it to remove the back cover of the key, then also remove the small protective cap located on the battery holder. Finally, locate the exhausted battery and replace it with a new one of the same type. Reassemble the protective cap and the back cover, and the procedure is successfully completed.

Posted on 4 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery in a Toyota C-HR?
How to Replace the Remote Battery in a Toyota C-HR?
Toyota C Hr (2016-2023 / Ax50, MK 1, Ax10) To replace the battery in a Toyota C-HR remote, move the tab located at the bottom of the remote to extract the key from its housing. By levering her…
How to replace the remote battery for the Toyota C-HR?
How to replace the remote battery for the Toyota C-HR?
Toyota C Hr (2016-2023 / Ax50, MK 1, Ax10) To replace the battery in the Toyota C-HR key fob, press the button on the top to extract the key from its housing. Once the key is removed, pry insi…
How to replace the remote battery of the Toyota C-HR?
How to replace the remote battery of the Toyota C-HR?
Toyota C Hr (2016-2023 / Ax50, MK 1, Ax10) To replace the remote battery of the Toyota C-HR, remove the key from the top of the device, so that it is completely removed from its housing: once …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos