Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Bulbs in the Rear Light of a Toyota Auris

Model: Toyota Auris E150 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Tail light bulb

See other generations:
Video tutorial

How to replace the bulbs in the rear light of a Toyota Auris? This is a very simple and quick operation, follow these steps: open the boot lid, then unscrew the retaining bolts of the rear light (on the side of the light) using a socket or tube spanner, pull it out of its housing (use a plastic lever if needed) and disconnect the power connectors attached to the light.

Replace the damaged bulbs with new ones (same voltage) at hand.

Refit the light with the respective retaining bolts and test the correct operation of the lights.


Updated on 8 March 2026 by ScegliAuto


Related tutorials

Toyota Auris (2007-2012 / E150) Are the rear lights of your car not working anymore? Here’s how to replace the bulbs in the rear light on a Toyota Auris: Open and lift the boot lid,…
Toyota Auris (2007-2012 / E150) Need to replace the front headlight bulbs on a Toyota Auris? Here’s how to proceed. Open the front bonnet by pulling the lever located at the bottom …
Toyota Auris (2012-2018 / E180) Today, we will go through the instructions to remove and replace the rear light bulbs on a Toyota Auris. First, open the boot lid and start unscrewin…

How to Activate the Cruise Control on the Toyota Yaris?

To activate the cruise control on the Toyota Yaris, start the engine by turning the key in the ignition switch. Once the engine is running, press the accelerator pedal until you reach the desired speed. Then, press the button on the right side of the steering wheel to activate the cruise control. You can also adjust the cruising speed by lifting the switch to increase it and lowering the switch to decrease it.

Watch the video!


by ScegliAuto

More videos