Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Rear Headlight Bulb for Toyota Auris

Model: Toyota Auris E150 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Tail light bulb

See other generations:
Video tutorial

Are the rear lights of your car not working anymore? Here’s how to replace the bulbs in the rear light on a Toyota Auris: Open and lift the boot lid, remove the plastic panel (cover) on the side of the trim and access the bulbs to be replaced (unscrew the securing pin if you need to remove the light).

Prepare to replace the damaged bulbs with new ones (same size and voltage).

Finally, reassemble the bulb holder with the new bulbs and refit the plastic cover that conceals the compartment. Test the correct operation of the previously installed bulbs.


Updated on 8 March 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulb on a Toyota Auris Hybrid?
How to Replace the Rear Light Bulb on a Toyota Auris Hybrid?
Toyota Auris (2012-2018 / E180) To replace the rear light bulb on a Toyota Auris Hybrid, open the tailgate to access the screws located next to the corresponding light unit. By loos…
Replacing the Reverse Light Bulb on a Toyota Auris
Replacing the Reverse Light Bulb on a Toyota Auris
Toyota Auris (2012-2018 / E180) Follow this guide to remove and replace the reverse light bulb, as well as the other bulbs in the rear lamp of the Toyota Auris. First, open the boot…
How to Replace the Rear Light Bulb on a Toyota Auris?
How to Replace the Rear Light Bulb on a Toyota Auris?
Toyota Auris (2012-2018 / E180) Before proceeding, open the tailgate of your Toyota Auris. Start by unclipping and removing the inner cover of the tailgate. Once done, carefully uns…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos