Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on a Toyota Auris Hybrid?

Model: Toyota Auris E180 - Years 2012-2018
Part: Tail light bulb

To replace the rear light bulb on a Toyota Auris Hybrid, open the tailgate to access the screws located next to the corresponding light unit. By loosening these screws, you can remove the light from its housing and disconnect the connector at the back. This will allow you to extract the bulb inside for replacement with a new one; after the new bulb has been properly connected and inserted, you can reinsert the light and secure it with the appropriate screws.

Updated on 26 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear light bulb on a Toyota Auris?
How to replace the rear light bulb on a Toyota Auris?
Toyota Auris (2007-2012 / E150) To replace the rear light bulb on a Toyota Auris, open the tailgate to access the side of the boot where the bulb needs replacing. Here, you can deta…
How to replace the front headlight bulb of the 2014 Toyota Auris Hybrid
How to replace the front headlight bulb of the 2014 Toyota Auris Hybrid
Toyota Auris (2012-2018 / E180) In the following guide dedicated to all of you who own a Toyota Auris Hybrid (2014), we will explain how to replace the headlight bulb in just a few …
How to replace the rear windshield washer tank bulb of the Toyota Auris
How to replace the rear windshield washer tank bulb of the Toyota Auris
Toyota Auris (2018-2024 / E210) Replacing the rear windshield washer tank bulb on a Toyota Auris Hybrid is a very simple operation, which can be done independently thanks to our sho…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos