Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulb of the 2014 Toyota Auris Hybrid

Model: Toyota Auris E180 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight bulb

See other generations:
Video tutorial

In the following guide dedicated to all of you who own a Toyota Auris Hybrid (2014), we will explain how to replace the headlight bulb in just a few minutes. First of all, lift the front hood and make sure the engine is cool enough to safely perform the replacement.

At this point, remove the protective cap located behind the headlight and then disconnect the electrical connector. Next, remove the non-functioning bulb and replace it with a new one of the same type.

Finally, reconnect the electrical cable and reassemble the protective cap.


Posted on 13 March 2025 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulb on a Toyota Auris Hybrid?
How to Replace the Rear Light Bulb on a Toyota Auris Hybrid?
Toyota Auris (2012-2018 / E180) To replace the rear light bulb on a Toyota Auris Hybrid, open the tailgate to access the screws located next to the corresponding light unit. By loos…
Replace the Headlight Bulb on a Toyota Auris
Toyota Auris (2012-2018 / E180) Today, you will learn how to replace the headlight bulb on a Toyota Auris. First, open the bonnet and locate the rear part of the headlight that cont…
How to replace the front headlight bulb of the Toyota Auris
How to replace the front headlight bulb of the Toyota Auris
Toyota Auris (2012-2018 / E180) Today's information will allow us to disassemble and replace the front headlight bulb of the Toyota Auris. First, we open the hood of the car and sta…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos