Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on a Toyota Auris?

Model: Toyota Auris E180 - Years 2012-2018
Part: Tail light bulb

Before proceeding, open the tailgate of your Toyota Auris. Start by unclipping and removing the inner cover of the tailgate. Once done, carefully unscrew and remove the screws that secure the rear light to its housing. At this point, gently pull out the light and disconnect the corresponding electrical connector to access the bulb holder. Proceed by carefully unclipping the clips that hold the bulb holder to the light. Now, you can precisely remove the damaged bulb and successfully complete the disassembly. To fit the new bulb on your Toyota Auris, follow these steps in reverse with care and precision, and you will have successfully completed the replacement.

Updated on 19 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace the Headlight Bulb on a Toyota Auris
Toyota Auris (2012-2018 / E180) Today, you will learn how to replace the headlight bulb on a Toyota Auris. First, open the bonnet and locate the rear part of the headlight that cont…
How to Replace the Front Headlight Bulb on the Toyota Auris
How to Replace the Front Headlight Bulb on the Toyota Auris
Toyota Auris (2012-2018 / E180) To replace the front headlight bulb on the Toyota Auris, open the bonnet to access the engine compartment. This will allow you to loosen the screws s…
How to Replace the Front Headlight Bulb on a Toyota Auris?
How to Replace the Front Headlight Bulb on a Toyota Auris?
Toyota Auris (2007-2012 / E150) You can replace the front headlight bulb on a Toyota Auris by opening the bonnet to access the components in the engine bay: here you will find the i…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos