Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on a Toyota Rav 4 Hybrid?

Model: Toyota Rav 4 Xa50, MK 5 - Years 2019-2026
Part:

The tyre pressure light on the Toyota Rav 4, like on other vehicles, indicates a drop in inflation pressure, often due to a lack of regular checks. Inflate the tyres, for example, using an air compressor, bringing the value back within the range set by the manufacturer, then perform the reset of the aforementioned light: turn on the instrument cluster, then use the directional buttons on the steering wheel to select Tpms, then select Set Pressure and finally press Ok. Once done, the fault has been cleared, and you can turn off the instrument cluster.

Posted on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure light on the Toyota RAV4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) The ignition of the tire pressure warning light indicates a possible puncture or loss of pressure; let's see how to reset the TPMS light on the Toyot…
How to reset the tyre pressure warning light on the Toyota RAV 4?
How to reset the tyre pressure warning light on the Toyota RAV 4?
Toyota Rav 4 (2013-2018 / MK 4, Xa40) To reset the tyre pressure warning light on the Toyota RAV 4, first inflate the tyres to the correct pressure value, which is indicated on the sticke…
How to Reset the Tyre Pressure Warning Light on a Toyota RAV 4?
How to Reset the Tyre Pressure Warning Light on a Toyota RAV 4?
Toyota Rav 4 (2013-2018 / MK 4, Xa40) To reset the tyre pressure warning light on a Toyota RAV 4, inflate all the tyres to the correct pressure value: this value is found on the sticker a…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos