Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on a Toyota RAV 4?

Model: Toyota Rav 4 MK 4, Xa40 - Years 2013-2018
Part: Tire pressure warning light

To reset the tyre pressure warning light on a Toyota RAV 4, inflate all the tyres to the correct pressure value: this value is found on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn the ignition on by rotating the key in the ignition switch. Press and hold the button with the low pressure icon located under the steering column. You will notice that the warning light will disappear from the instrument cluster.

Updated on 1 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tyre pressure light on the Toyota RAV 4?
How to reset the tyre pressure light on the Toyota RAV 4?
Toyota Rav 4 (2000-2006 / Xa20, MK 2) On the Toyota RAV 4, to reset the tyre pressure light, first inflate the tyres to the correct pressure value: this value is indicated on the sticker …
How do you reset the tire pressure light on the Toyota RAV4?
How do you reset the tire pressure light on the Toyota RAV4?
Toyota Rav 4 (2019-2026 / Xa50, MK 5) On the instrument panel of the Toyota RAV 4, the tire pressure warning light that is displayed can be reset by inflating the tires until they are bro…
How to reset the tyre pressure warning light on the Toyota RAV 4?
How to reset the tyre pressure warning light on the Toyota RAV 4?
Toyota Rav 4 (2013-2018 / MK 4, Xa40) To reset the tyre pressure warning light on the Toyota RAV 4, first inflate the tyres to the correct pressure value, which is indicated on the sticke…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos