|
Do it yourself
| |||
| ||||
How to Change the Fog Light on a Toyota RAV 4
Model: Toyota Rav 4
MK 4, Xa40
- Years 2013-2018
To change the fog light on the Toyota RAV 4, follow these simple steps. The video shows the procedure on a Toyota RAV 4, but the process is the same. Start by removing the wheel to gain more working space. Access the wheel arch, unscrew the screw that secures it, and then carefully remove the plastic clips that also hold it in place. Once done, you can remove the wheel arch cover and see the fog light, usually secured with 2 hex screws. Disconnect the connector and unscrew the securing screws to remove the fog light. Once removed, carefully unscrew the bulb and replace it with a new one. After everything is complete, reposition the fog light in its designated space, secure it with the two screws, and reconnect the connector. Once the wheel arch is reattached, secured with its plastic clips and fixing screw, you can proceed to remount the wheel. The fog light has now been changed!
Posted on 5 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Toyota Rav 4
(2019-2026 /
Xa50, MK 5)
Let’s look at the instructions that will allow you to remove and replace the front fog light bulbs on the Toyota RAV 4. To access the fog light, you …
Toyota Rav 4
(2013-2018 /
MK 4, Xa40)
In this tutorial video, you will learn how to remove and replace the front fog light bulb on a third-generation Toyota RAV 4. First, remove the plast…
Toyota Rav 4
(2019-2026 /
Xa50, MK 5)
To install the rear fog lights on the Toyota RAV 4, loosen the screws securing the rear bumper to its housing: these screws will be found at the bott…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.240
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |