|
Do it yourself
| |||
| ||||
Locating the Fuse Box and Its Position
Model: Toyota Yaris
Xp130
- Years:
2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Video tutorial
Fuses are contained in a box within the engine compartment; the cover of the box indicates the fuse values, their positions, and which circuits they protect. Fuses are safety devices that protect the electrical system from potential short circuits. When a fuse blows, the causes can vary, but the most likely reason is an overload in the circuit. To check if the overload was temporary, simply replace the blown fuse with another of the same rating. If the new fuse blows again, it indicates a short circuit in the electrical system, in which case intervention is necessary to resolve the fault. If the affected electrical system returns to normal operation, the fuse may have blown due to a temporary overload or 'ageing'. The replacement is very simple; just pull the old fuse out of the socket and insert the new one, which must be of the same amperage rating.
Updated on 5 February 2026 by ScegliAuto
Related tutorials
Toyota Yaris
(2005-2011 /
Xp90)
The fuses on a Toyota Yaris are contained within designated fuse boxes installed in the vehicle. This model has two fuse boxes. The first is located …
Toyota Yaris
(2005-2011 /
Xp90)
All the fuse boxes of the Toyota Yaris have the function of containing the fuses that manage the operation of the devices installed on the vehicle: i…
Toyota Yaris
(1999-2005 /
Xp10)
This video shows the position and diagram of the fuse box for the Toyota Yaris XP10: the first fuse box and relays are located in the engine compartm…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to reset the Service light on a 2019 Jeep Renegade?
The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.872
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |