Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Brake Discs on Toyota Yaris

Model: Toyota Yaris Xp10 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Brake rotors

See other generations:
Video tutorial

In today's video, learn how to remove and replace the front brake discs on a first-generation Toyota Yaris. First, lift the vehicle and remove the front wheel: then, take off the rear bolts of the brake caliper to detach it and remove it from the disc, along with the pads; use leverage inside to retract the piston.

At this point, extract the brake disc and replace it with the new one; before reassembling everything, clean the area and then fit the pads back with the caliper, as shown in the video!


Updated on 5 April 2026 by ScegliAuto


Related tutorials

Replacement of the front headlight of the Toyota Yaris
Replacement of the front headlight of the Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Today's main instructions will show us how to disassemble and replace the front headlight of the Toyota Yaris. First, we open the car's hood and star…
Disassembly and replacement of the front headlight of the Toyota Yaris
Disassembly and replacement of the front headlight of the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Today's step-by-step instructions will allow us to disassemble and replace the front headlight of the Toyota Yaris. First, we lift the car and start …
Replacing the Front Brake Pads on the Toyota Yaris
Replacing the Front Brake Pads on the Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) In this guide, discover how to replace the front brake pads on the Toyota Yaris in simple and quick steps. First, lift the vehicle and remove the fro…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos