Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly and replacement of the front headlight of the Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Headlight

See other generations:
Video tutorial

Today's step-by-step instructions will allow us to disassemble and replace the front headlight of the Toyota Yaris. First, we lift the car and start unscrewing the fixing screws found on the lower part of the front bumper; we remove the additional screws found above the bumper and on both sides of the front wheel arches, thus removing the entire bumper, as shown in the video.

Now we unscrew the screws of the headlight group and disconnect the electrical connector of the bulbs to remove it, replacing it with the new one; we reassemble the front headlight and adjust its height if necessary!


Posted on 2 July 2025 by ScegliAuto


Related tutorials

Replacement of the front headlight and bulbs of the Toyota Yaris
Replacement of the front headlight and bulbs of the Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Below we will discover the instructions that will allow us to disassemble and replace the front headlight and its bulbs of the Toyota Yaris. First, l…
Headlight Bulb Replacement for Toyota Yaris
Headlight Bulb Replacement for Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Are the headlight bulbs damaged? Let’s look at removing the front headlight bulbs from a Toyota Yaris. Lift the front bonnet of the car and secure it…
How to Replace the Front Headlight in the Toyota Yaris
How to Replace the Front Headlight in the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) In today's video, you will learn how to replace the front headlight in the second series Toyota Yaris. First, ensure the engine is cold to avoid burn…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos