Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlamp of the Toyota Yaris XP130

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight

See other generations:
Video tutorial

To change the front headlamp of the Toyota Yaris XP130, it is advisable to remove the bumper to comfortably access all the screws of the headlamp, which is secured by a bolt at the top (near the support) and one in a middle position. Once all the bolts are removed, grasp the headlamp and pull it outwards to extract it from its housing.

The most delicate part involves disconnecting the electrical connectors, which can be a bit stiff: do not rush, as this may cause them to break. For the bumper removal, we recommend one of our tutorials that describes the procedure in detail.


Posted on 3 March 2026 by ScegliAuto


Related tutorials

How to Remove the Headlamp from the Toyota Yaris 2
How to Remove the Headlamp from the Toyota Yaris 2
Toyota Yaris (2005-2011 / Xp90) How do you remove the headlamp from the Toyota Yaris? To remove the front headlamp of the Yaris, you need to take off the front bumper. Use a screwdr…
Replacing the Front Headlamp Bulbs on the Toyota Yaris
Replacing the Front Headlamp Bulbs on the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) This brief guide provides instructions for removing and replacing the front headlamp bulb on the Toyota Yaris. First, open the vehicle's bonnet and b…
How to Replace the Front Headlight Bulb on a Toyota Yaris
How to Replace the Front Headlight Bulb on a Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Let’s discover the steps to remove and replace the front headlight bulb on a Toyota Yaris. First, open the bonnet of the vehicle and start by removin…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos