Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb on a Toyota Yaris

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

See other generations:
Video tutorial

Let’s discover the steps to remove and replace the front headlight bulb on a Toyota Yaris. First, open the bonnet of the vehicle and start by removing the plastic protective cap from the bulbs; then disconnect the bulb holder, thus extracting the bulb from the headlight unit, as shown in the video.

At this point, replace and install the new dipped beam bulb of the correct type and with the same fitting; refit the plastic cap and check the operation of the light, replacing the other dipped beam bulb in the same way!


Posted on 28 April 2026 by ScegliAuto


Related tutorials

How to replace the front headlight of the Toyota Yaris
How to replace the front headlight of the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Today we will explain how to replace the front headlight of the Toyota Yaris car. Before replacing the headlight, it is necessary to remove the front…
How to Remove the Headlamp from the Toyota Yaris 2
How to Remove the Headlamp from the Toyota Yaris 2
Toyota Yaris (2005-2011 / Xp90) How do you remove the headlamp from the Toyota Yaris? To remove the front headlamp of the Yaris, you need to take off the front bumper. Use a screwdr…
How to Replace the Front Headlight Bulb on a Toyota Yaris
How to Replace the Front Headlight Bulb on a Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) To replace the front headlight bulb on a Toyota Yaris, open the bonnet and access the rear of the affected headlight. Remove the rubber or plastic pr…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos