Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Diagram and Location on Toyota Rav 4

Model: Toyota Rav 4 MK 4, Xa40 - Years 2013-2018
Part: Fuse box

In this video, we provide the table for the fuse box diagram located in the cabin, specifically at the bottom left of the steering wheel (under the side air vent and below the switches that control the headlights). As shown in the table, this box contains fuses for the windscreen wipers, most bulbs, the air conditioning, and more. Two additional fuse boxes are located under the bonnet, on either side of the engine bay. Here, you can also find fuses related to the engine, as well as other bulbs such as those illuminating the boot.

Updated on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Location and Diagram of the Internal Fuses in a Toyota RAV 4
Location and Diagram of the Internal Fuses in a Toyota RAV 4
Toyota Rav 4 (2019-2026 / Xa50, MK 5) This guide shows where to find the internal fuse box and how to obtain the diagram for a Toyota RAV 4. First, open the driver's side front door and b…
Fuse Diagram and Location for the Toyota RAV 4
Fuse Diagram and Location for the Toyota RAV 4
Toyota Rav 4 (2019-2026 / Xa50, MK 5) Today, this guide shows where to find the fuse boxes (internal and external) for the Toyota RAV 4, following the instructions below. First, open the …
Fuses Location and Diagram for the Toyota RAV 4
Fuses Location and Diagram for the Toyota RAV 4
Toyota Rav 4 (2019-2026 / Xa50, MK 5) Today's guide will show the location of the fuse boxes and where to find their diagram for the Toyota RAV 4. First, open the bonnet to locate the ext…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos