Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Key Shell of the Toyota Yaris MK1

Model: Toyota Yaris Xp10 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Key

See other generations:
Video tutorial

In this video tutorial, you will learn how to disassemble and replace the shell of the key on the first series Toyota Yaris, following the instructions below. First, take your key and pry it open from the side to separate it into two parts; then remove the key from the shell and extract the chip, as shown in the video.

Next, unscrew the screw of the new shell and transfer all components to the new casing, ensuring everything is positioned and assembled correctly; just follow the video to the end for reassembling the key!


Updated on 26 April 2026 by ScegliAuto


Related tutorials

How to Replace the Key Shell of the Toyota Yaris?
How to Replace the Key Shell of the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) To replace the key shell of the Toyota Yaris, loosen the screw that secures the key blade at the top of the device: once this is loosened, you can re…
How to Replace the Key Battery in a Toyota Yaris
How to Replace the Key Battery in a Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) If you need to replace the key battery in your Toyota Yaris (2016-2020), simply follow these instructions. First, take the key and locate the small b…
How to Replace the Key Battery on a 2018 Toyota Yaris
How to Replace the Key Battery on a 2018 Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) To safely and correctly replace the button battery inside your 2018 Toyota Yaris key, follow these simple steps. First, press the button located on t…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos