Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from a Toyota Rav4 Mk3

Model: Toyota Rav 4 MK 3, Xa30 - Years 2006-2013
Part: Car stereo

This guide shows how to dismantle the radio from a Toyota Rav4 Mk3. This task does not require specialist tools. First, use a plastic trim removal tool to take off the two trims on either side of the radio. Next, using a 10 mm spanner, undo the four fixing bolts of the radio unit and extract it. Be careful with the electrical cables. Disconnect the wires at the back of the radio and remove it completely. Check the dimensions of the new radio before installing it to avoid damaging any components.

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Radio in the Toyota RAV4?
How to Remove the Radio in the Toyota RAV4?
Toyota Rav 4 (2000-2006 / Xa20, MK 2) As shown in this tutorial, removing the radio in the Toyota RAV4 is an extremely simple and quick operation. Before proceeding, ensure that the key i…
Removing the Radio from a Toyota Rav4
Removing the Radio from a Toyota Rav4
Toyota Rav 4 (2000-2006 / Xa20, MK 2) To remove the original radio from the dashboard of a Toyota Rav4 for replacement with a more updated model, use a thin lever, preferably plastic to a…
How to disassemble the instrument panel of the Toyota RAV4
How to disassemble the instrument panel of the Toyota RAV4
Toyota Rav 4 (2019-2026 / Xa50, MK 5) Thanks to the procedure described in this new guide, you will be able to dismantle the instrument panel of your Toyota RAV4 (latest model) in a few m…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos