Do it yourself
Frequently asked questions about cars and motorcycles

Toyota Hilux Fuse Box Diagram

Model: Toyota HiLux An30, An20, MK 7, An10 - Years 2005-2015
Part: Fuse box

This vehicle has two fuse boxes. The first is located just below the steering column inside a box covered by a plastic panel, while the second fuse box is near the door sill on the driver's side. To access it, you need to remove a nut and take off a plastic panel. The fuse box located in the cabin contains fuses for the front and rear power window regulators, the injection system, turn signals, instrument cluster, air conditioning, alarm system, central locking, fog lights, and rear lights.

Updated on 22 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Toyota HiLux (2015-2024 / An130, An120, MK 8) Following these brief and simple instructions, we will see the diagram and positioning of the fuse boxes of the Toyota Hilux. First of all, we get on…
Toyota HiLux (2015-2024 / An130, An120, MK 8) In this very short video guide today, we are shown in detail all the fuse box diagrams inside a Toyota Hilux, a specific model produced from 2015 to …
Toyota HiLux (2005-2015 / An30, An20, MK 7, An10) In this video, it is possible to observe the fuse diagram related to a Toyota Hilux vehicle. The first diagram shown is related to the fuse box locat…

Other guides you may be interested in

    Frequently Asked Questions

    • Hi Lux 2015-2024 - Where is the fuse for the Toyota Hilux cigarette lighter located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos