Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Shift Knob of the Toyota Roomy Tank

Model: Toyota Roomy Tank MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Shift knob

Video tutorial

In this guide, find instructions on how to remove and replace the shift knob of the Toyota Roomy Tank. First, get inside the vehicle and start by removing the plastic clip located under the knob, using something thin and pointed. Then, pull the shift knob upward to remove it from the lever, as shown in the video.

At this point, install the new shift knob by inserting it in the correct orientation; reattach the plastic clip to secure the knob to the lever, following the video to the end!


Updated on 1 June 2026 by ScegliAuto


Related tutorials

Where to Find the Serial Number on the Toyota Roomy Tank?
Where to Find the Serial Number on the Toyota Roomy Tank?
Toyota Roomy Tank (2016-2023 / MK 1) In this video, you can see where the identification number of your Toyota Roomy Tank is indicated. This, known in English as the VIN Number, is a uni…
How to Replace the Front Brake Pads on the Toyota Roomy Tank
How to Replace the Front Brake Pads on the Toyota Roomy Tank
Toyota Roomy Tank (2016-2023 / MK 1) This guide provides the main instructions for removing and replacing the front brake pads on the Toyota Roomy Tank. First, lift the vehicle with a ja…
How to Replace the Cabin Air Filter on the Toyota Roomy Tank
How to Replace the Cabin Air Filter on the Toyota Roomy Tank
Toyota Roomy Tank (2016-2023 / MK 1) Today, we will see in this short and simple guide how to replace the cabin air filter on the Toyota Roomy Tank. First, get into the vehicle on the fr…

How to replace the handbrake button on the Opel Mokka?

The handbrake button on the Opel Mokka can be replaced without going to a mechanic. The installation system is snap-fit with plastic clips and does not require special tools. First, remove the old button, possibly using a flat screwdriver to pry it off. Next, check for any fragments and remove them using tweezers if necessary. At this point, install the new button by placing it in its seat and applying light pressure to snap the clips into place.

Watch the video!


by ScegliAuto

More videos