Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Automatic Gear Knob in a Toyota Land Cruiser

Model: Toyota Land Cruiser J200, MK 11 - Years 2007-2021
Part: Shift knob

In this tutorial, you will see how to replace the automatic gear knob in a Toyota Land Cruiser, a very simple and quick operation. First, go inside the cabin, then grip the ring at the base of the knob, push it down firmly and unclip it. Next, grip the knob itself, unscrew it, and pull it off the shaft. At this point, simply position the replacement and reassemble everything by following the reverse procedure. If you also want to replace the gaiter, just unclip its base with a plastic spatula.

Posted on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Activate the Four-Wheel Drive of the Toyota Land Cruiser?
How to Activate the Four-Wheel Drive of the Toyota Land Cruiser?
Toyota Land Cruiser (1996-2002 / MK 8, J90) To activate the four-wheel drive of the Toyota Land Cruiser, use the lever located in the cabin below the steering column, behind the gear selector l…
How to deactivate the traction control of the Toyota Land Cruiser
Toyota Land Cruiser (2007-2021 / J200, MK 11) Today's instructions will allow us to deactivate the traction control of the Toyota Land Cruiser. First, let's get into the vehicle and start the das…
Where is the cabin fuse box located in the Toyota Land Cruiser J80?
Where is the cabin fuse box located in the Toyota Land Cruiser J80?
Toyota Land Cruiser (1990-1997 / MK 7, J80) To access the cabin fuse box in your Toyota Land Cruiser J80, follow the steps outlined below. Before starting, ensure the vehicle is parked on a fla…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos