Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Wiper Blade on a Toyota Highlander

Model: Toyota Highlander Xu40 - Years: 2008, 2009, 2010, 2011, 2012, 2013
Part: Windshield wipers

See other generations:
Video tutorial

To replace the rear wiper blade on a Toyota Highlander, you need to remove the plastic protective cap located at the base of the wiper and lift the blade to detach it from the rear screen. This way, the blade can be positioned perpendicular to the arm, releasing the fixing pin that secures it to the arm. At this point, you can insert the new blade, fitting it onto the pin at the end of the arm; finally, lower the blade and reattach the cover at the base of the wiper.


Updated on 2 June 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Wiper Blade on a 2016 Toyota Highlander
How to Replace the Rear Wiper Blade on a 2016 Toyota Highlander
Toyota Highlander (2014-2019 / Xu50) This tutorial video shows how to replace the rear wiper blade on a 2016 Toyota Highlander by following a few simple steps. Lift the cover of the wipe…
How to Replace the Wiper Blades on a Toyota Highlander?
How to Replace the Wiper Blades on a Toyota Highlander?
Toyota Highlander (2001-2007 / Xu20) To replace the wiper blades on a Toyota Highlander, lift the arm of the respective blade so that it does not contact the windscreen. Once lifted, use…
How to Replace the Front Wipers and Their Arms on a Toyota Highlander
How to Replace the Front Wipers and Their Arms on a Toyota Highlander
Toyota Highlander (2001-2007 / Xu20) In this guide, learn how to remove and replace the front wipers and their arms on a Toyota Highlander. First, move to the front of your car and lift …

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos