Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Wiper Blade on a 2016 Toyota Highlander

Model: Toyota Highlander Xu50 - Years 2014-2019
Part: Windshield wipers

This tutorial video shows how to replace the rear wiper blade on a 2016 Toyota Highlander by following a few simple steps. Lift the cover of the wiper blade fixing bolt. This will allow you to fully lift the blade. Flip the blade completely back and pull to remove it from its housing. Once removed, you will have more space to work. Replace the rubber of the wiper blade as shown in the video, or replace the entire blade directly. Refit all parts in reverse order.

Updated on 17 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Wiper Blade on a Toyota Highlander
How to Replace the Rear Wiper Blade on a Toyota Highlander
Toyota Highlander (2008-2013 / Xu40) To replace the rear wiper blade on a Toyota Highlander, you need to remove the plastic protective cap located at the base of the wiper and lift the b…
How to Replace the Front Wipers and Their Arms on a Toyota Highlander
How to Replace the Front Wipers and Their Arms on a Toyota Highlander
Toyota Highlander (2001-2007 / Xu20) In this guide, learn how to remove and replace the front wipers and their arms on a Toyota Highlander. First, move to the front of your car and lift …
How to Replace the Wiper Blades on a Toyota Highlander?
How to Replace the Wiper Blades on a Toyota Highlander?
Toyota Highlander (2001-2007 / Xu20) To replace the wiper blades on a Toyota Highlander, lift the arm of the respective blade so that it does not contact the windscreen. Once lifted, use…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos