Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Sienta
    4. : How to program a new key for the Toyota Sienta?

Toyota Sienta - Video tutorial

Model: Toyota Sienta Npc80 - Years 2003-2015
Part: Key
Operation: How to program a new key for the Toyota Sienta?

Have you bought a new blank key and want to program it yourself without spending money at the dealer? You can do this by following the steps illustrated in the video. Close all doors except the driver's door and insert and remove the key twice in a row. Close and reopen the driver's door twice and then insert and remove the key once more (this step must be performed twice). Now close the door, insert the key, turn on the instrument panel, then turn it off and take out the key. Press the opening and closing buttons on the key at the same time for about one and a half seconds and then only the closing button for the same amount of time. Congratulations, you have programmed the key!


Posted on 1 September 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos