Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Tyre Pressure Warning Light on the Toyota C-HR?

Model: Toyota C Hr Ax10, MK 1, Ax50 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tire pressure warning light

See other generations:
Video tutorial

Following a puncture, after replacing the tyres, or simply because the inflation pressure is lower than expected, the warning light will illuminate. To reset it, after restoring safe conditions, do the following: Turn on the ignition, where you will notice the warning light on the central display, and using the directional arrows on the right side of the steering wheel, enter the main menu.

From here, select the Alerts, Configurations, Tyres option and then choose Reset. By pressing the Ok button, you will enable this option and turn off the aforementioned warning light.


Updated on 22 June 2026 by ScegliAuto


Related tutorials

Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) Follow the instructions in the video to reset the tyre pressure warning light on the 2020 Toyota C-HR. Before starting, ensure that the tyres are at …
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) In this tutorial, you will see how to reset the tyre warning light on the Toyota C-HR, a very simple and quick operation, to be performed only after …
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) To reset the tyre pressure warning light on the Toyota C-HR, first ensure all tyres are at the correct inflation pressure. Once the pressure is verif…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos