Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Rav 4
    4. : How to reset the tire warning light on Toyota Rav 4 2016

Toyota Rav 4 - Video tutorial

Model: Toyota Rav 4 Xa40, MK 4 - Years 2013-2018
Part: -board computer
Operation: How to reset the tire warning light on Toyota Rav 4 2016

In the following mini-guide regarding the 2016 Toyota Rav 4 we are going to describe you a method as simple as it is effective which will allow you to manually reset the car's tire warning light. It will only take you a few seconds to complete the entire procedure. First insert the key and start the ignition. Then go to the lower part of the steering wheel and locate the "Set" button. Hold it down for a few seconds and release it as soon as the yellow warning light on the instrument cluster mini-display disappears definitively. At this point the restore is completed successfully.


Posted on 17 December 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Rav 4 2019-2026 - What is the meaning of the warning lights on the Toyota RAV4 dashboard? Read Answer
    • Rav 4 2013-2018 - What does the Toyota RAV 4 engine light indicate? Read Answer
    • Rav 4 2013-2018 - What does the yellow tire light on the Toyota RAV 4 mean? Read Answer
    • Rav 4 2006-2013 - Why did the yellow light on Toyota RAV 4 come on? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos