Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Light on the Toyota Rav 4

Model: Toyota Rav 4 MK 4, Xa40 - Years 2013-2018
Part:

If you notice the tyre light is on when starting your 2013 Toyota Rav 4, don't worry as you can perform a quick manual reset to resolve the issue. First, get inside the vehicle and turn on the ignition. Then, go to the lower area of the dashboard (under the steering wheel) and locate a small button with a tyre symbol and the word "Set". Press and hold it for about ten seconds, then release it. The reset is now successfully completed, and the warning light will remain off from the next start.

Updated on 26 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Light on the Toyota RAV4
How to Reset the Tyre Pressure Light on the Toyota RAV4
Toyota Rav 4 (2025-2026 / Xa60) Today we will see the instructions that will allow us to reset the tyre pressure light on the Toyota RAV4; before resetting the TPMS sensors, ensure …
How to Reset the Tyre Pressure Light on a Toyota RAV4?
How to Reset the Tyre Pressure Light on a Toyota RAV4?
Toyota Rav 4 (2019-2026 / Xa50, MK 5) The tyre pressure light on a Toyota RAV4 can be reset by inflating the car's tyres to the correct pressure: this value is indicated on the sticker lo…
How do you reset the tire pressure light of the Toyota RAV 4?
How do you reset the tire pressure light of the Toyota RAV 4?
Toyota Rav 4 (2013-2018 / MK 4, Xa40) The tire pressure warning light that appears on the instrument panel of the Toyota RAV 4 can be reset by inflating all tires to the recommended press…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos