Do it yourself
Frequently asked questions about cars and motorcycles

Resetting the Tyre Pressure Monitoring System on a Toyota Yaris

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tire pressure warning light

See other generations:
Video tutorial

In this brief guide, we will see the step-by-step instructions to reset the Tyre Pressure Monitoring System (TPMS) warning light on a Toyota Yaris. First, get in the vehicle and start the engine; ensure that the pressures of all four tyres are at the operating pressure.

Then locate the reset button, situated above the pedals on the driver's side; press and hold the TPMS reset button for a few seconds until the warning light goes out on the instrument panel. Finally, turn off and restart the engine!


Updated on 5 July 2026 by ScegliAuto


Related tutorials

Toyota Yaris (2020-2026 / MK 4) To reset the tyre pressure light on the Toyota Yaris, first inflate the tyres to the correct pressure, which is indicated on the sticker attached to …
Toyota Yaris (2011-2019 / Xp130) In this article today, we will show you how to reset the tire pressure light on the Toyota Yaris. For this operation, no tools or software are needed…
Toyota Yaris (2020-2026 / MK 4) Today's steps will allow you to reset the tyre pressure monitoring system (TPMS) light on the Toyota Yaris; before recalibrating the TPMS sensors, en…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos