Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Diagram for the 2015 Toyota Yaris

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Fuse box

See other generations:
Video tutorial

This brief video tutorial shows the exact position of the two fuse boxes, along with all the relevant diagrams detailing the name, position, and operating amperage of each individual fuse for a third-generation Toyota Yaris, specifically produced from 2015 to 2018. The first fuse box can be found inside the vehicle's cabin, near the driver's footwell and behind a small panel that needs to be removed.

The second fuse box, however, is located in the engine compartment on the right side, as shown in the video.


Updated on 9 July 2026 by ScegliAuto


Related tutorials

What is the Fuse Diagram for the Toyota Yaris?
Toyota Yaris (1999-2005 / Xp10) In this video, we can see the fuse diagram and the location of the respective boxes in the Toyota Yaris, useful if you need to check the status of a …
What is the Fuse Diagram for the 2013 Toyota Yaris?
What is the Fuse Diagram for the 2013 Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) The video presented here illustrates the fuse diagram for the 2013 Toyota Yaris. As you can immediately notice from the first few seconds, these elem…
How to Access the Internal Fuse Box of the Toyota Yaris
How to Access the Internal Fuse Box of the Toyota Yaris
Toyota Yaris (2020-2026 / MK 4) Below are the instructions that will allow you to access the internal fuse box of the Toyota Yaris, along with the fuse diagram. First, open the fron…

    Frequently Asked Questions

    • Yaris 2005-2011 - Where is the Toyota Yaris fuel pump relay located? Read answer

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos