Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Chain on a Toyota Yaris?

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Timing belt

See other generations:
Video tutorial

To replace the timing chain on a Toyota Yaris, loosen the bolts securing the left side cover of the engine block. You will also need to loosen the bolts holding the right front wheel and the inner cover of the wheel arch.

This will allow you to access the chain tensioner, which must be removed by loosening its securing bolts. After removing the tensioner, you can slide the chain off the respective sprockets and insert the new replacement part, ensuring everything functions correctly.


Updated on 21 July 2026 by ScegliAuto


Related tutorials

Guide to Replacing and Adjusting the Timing Chain of the Toyota Yaris
Guide to Replacing and Adjusting the Timing Chain of the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) This guide provides useful information for replacing and subsequently adjusting the timing chain of the Toyota Yaris. The timing chain replacement is…
Guide to Replacing the Timing Chain on the Toyota Yaris 1.4
Guide to Replacing the Timing Chain on the Toyota Yaris 1.4
Toyota Yaris (2005-2011 / Xp90) Today's main steps will allow us to remove and replace the timing chain on the Toyota Yaris 1.4. To replace the chain, it is necessary to remove the …
When to Replace the Timing Chain on a Toyota Yaris VVT-I
When to Replace the Timing Chain on a Toyota Yaris VVT-I
Toyota Yaris (2005-2011 / Xp90) The information provided in this guide will show you how and when to replace the timing chain on the Toyota Yaris with a petrol VVT-I engine. The tim…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos