|
Do it yourself
| |||
| ||||
How to Program a Key for a Toyota Corolla?
Model: Toyota Corolla
MK 3
- Years 2006-2013
You can program a new remote key for the Toyota Corolla without needing a professional. Just follow the steps described here and shown in the video: -all doors must be unlocked -the driver's door must be open -take a previously programmed key and insert it twice into the ignition -close and reopen the driver's door twice -reinsert and remove the key once more -again, close and open the door for another two times -insert the key without removing it -close the door -turn the ignition on and off, then remove the key -take the new remote and hold the open and close buttons simultaneously for about one and a half seconds -release them and press the close button once. Now the new remote key is programmed.
Updated on 23 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Toyota Corolla
(2013-2019 /
MK 4, E170, E160)
In this video we will see how to program the key of the Toyota Corolla. The same procedure is also valid for Auris, Yaris, and Hilux. We must have al…
Toyota Corolla
(2019-2026 /
MK 5, E210)
Replacing the battery in your Toyota Corolla key takes just a few seconds and can be done independently. Follow the instructions provided here. First…
Toyota Corolla
(2006-2013 /
MK 3)
Before you begin, sit in the driver's seat of your Toyota Corolla. Insert the key into the ignition and turn it to the first position to activate the…
Other guides you may be interested in
|
How to Connect the Cables to the Battery of the Citroen Xsara Picasso?
In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.117
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
