Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Knob and Gaiter of the Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Shift knob

See other generations:
Video tutorial

Here are the necessary instructions to remove and replace the gear knob and gaiter of the Toyota Yaris. First, get in the vehicle and start by removing the gear knob; to do this, unscrew it counterclockwise, as shown in the video.

At this point, simply detach the gaiter from the bottom, on the sides, to remove it as well; then, if necessary, replace the previously removed components, installing the gaiter and securing the gear knob onto the lever!


Updated on 11 August 2026 by ScegliAuto


Related tutorials

How to Replace the Gear Knob and Gaiter on a Toyota Yaris?
How to Replace the Gear Knob and Gaiter on a Toyota Yaris?
Toyota Yaris (1999-2005 / Xp10) In this tutorial, see how to replace both the gear knob and gaiter on a Toyota Yaris, a very simple and quick operation. First, grip the knob, using …
How to Replace the Gear Knob on a Toyota Yaris
How to Replace the Gear Knob on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) This guide will show you how to remove and replace the gear knob on a Toyota Yaris in simple steps. First, get into the cabin and start by detaching …
Replacing the Gear Knob on a Toyota Yaris
Replacing the Gear Knob on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Want to replace the gear knob on your Toyota Yaris? In this video, see how to remove it from the centre console. Use a plastic lever to disconnect th…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos