Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the AdBlue Light on the Toyota Innova?

Model: Toyota Innova Kijang Crysta An140 - Years 2015-2023
Part: AdBlue warning light

To reset the AdBlue light on the Toyota Innova, you need to refill the tank, as the light comes on when the fluid level is low. Open the hood to access the engine compartment. The refill inlet is located at the top right of the engine compartment, just below the windshield on the driver's side. Once you remove the blue cap, you can add the necessary amount of fluid, ensuring that the light turns off completely.

Updated on 3 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the AdBlue Warning Light in the Toyota Innova Crysta?
How to Reset the AdBlue Warning Light in the Toyota Innova Crysta?
Toyota Innova Kijang Crysta (2015-2023 / An140) If the AdBlue warning light has illuminated in your Toyota Innova Crysta, it means that the level of the emissions fluid is too low and needs to be t…
How to Reset the AdBlue Warning Light on the Toyota Innova?
How to Reset the AdBlue Warning Light on the Toyota Innova?
Toyota Innova Kijang Crysta (2015-2023 / An140) The AdBlue warning light that illuminates on the instrument panel of the Toyota Innova indicates that the additional fluid in the tank is almost comp…
How to remove the AdBlue light in the Toyota Innova Crysta?
How to remove the AdBlue light in the Toyota Innova Crysta?
Toyota Innova Kijang Crysta (2015-2023 / An140) If the AdBlue warning light has turned on in the instrument panel of our Toyota Innova Crysta, it means that the liquid of the anti-pollution system …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos