Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Innova Kijang Crysta
    4. : How to remove the AdBlue warning light in the Toyota Innova Crysta?

Toyota Innova Kijang Crysta - Video tutorial

Model: Toyota Innova Kijang Crysta An140 - Years 2015-2023
Part: Checks and maintenance
Operation: How to remove the AdBlue warning light in the Toyota Innova Crysta?

If the AdBlue light has come on in the instrument panel of our Toyota Innova Crysta, it means that the liquid in the anti-pollution system has reached a low level and, consequently, it will need to be topped up. The procedure is very simple, let's see how to proceed in this tutorial. First of all, let's purchase a canister of at least 10 liters of urea, then turn off the engine and open the hood. Next, locate the blue cap located in front of the windshield, just behind the battery, unscrew it and insert the provided tube into it. At this point, pour the required amount of liquid and drive a few kilometers.


Posted on 23 August 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos