Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery on the Toyota Innova Kijang Crysta

Model: Toyota Innova Kijang Crysta An140 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Battery

See other generations:
Video tutorial

If you plan to DIY the battery replacement on this type of vehicle, you will find the instructions and information on how to proceed in the description below and in the video. After opening the hood, the battery is located on the left side.

First, remove the support screws of the upper mounting plate, then disconnect the negative terminal followed by the positive terminal. Next, pull out the battery and replace it with the new one, then reconnect the positive terminal first and then the negative terminal, and finally reattach the mounting plate.


Updated on 15 July 2026 by ScegliAuto


Related tutorials

How to Properly Position the Jack on the Toyota Innova Kijang Crysta
How to Properly Position the Jack on the Toyota Innova Kijang Crysta
Toyota Innova Kijang Crysta (2015-2023 / An140) This guide provides instructions on how to properly position the jack for removing and replacing the tire with the spare on the Toyota Innova Kijang …
How to Replace the Steering Wheel Airbag on the Toyota Innova Kijang Crysta
How to Replace the Steering Wheel Airbag on the Toyota Innova Kijang Crysta
Toyota Innova Kijang Crysta (2015-2023 / An140) Let's see in this brief and simple guide how to perform the removal and replacement of the steering wheel airbag on the Toyota Innova Kijang Crysta. …
How to Replace the Headlight Bulb of the Toyota Innova Kijang Crysta?
How to Replace the Headlight Bulb of the Toyota Innova Kijang Crysta?
Toyota Innova Kijang Crysta (2004-2015 / An40) To replace the headlight bulb of the Toyota Innova Kijang Crysta, open the hood to access the components inside the engine compartment. Specifically,…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos