Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb of the Toyota Innova Kijang Crysta?

Model: Toyota Innova Kijang Crysta An40 - Years 2004-2015
Part: Headlight bulb

To replace the headlight bulb of the Toyota Innova Kijang Crysta, open the hood to access the components inside the engine compartment. Specifically, you need to detach the circular rubber cover located at the back of the headlight: removing this cover will allow you to access the bulb inside, which should be pulled out and disconnected from its connector. Once the old bulb is removed, connect the new one by inserting it into the headlight and closing it with the cover.

Updated on 17 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Properly Position the Jack on the Toyota Innova Kijang Crysta
How to Properly Position the Jack on the Toyota Innova Kijang Crysta
Toyota Innova Kijang Crysta (2015-2023 / An140) This guide provides instructions on how to properly position the jack for removing and replacing the tire with the spare on the Toyota Innova Kijang …
How to Replace the Steering Wheel Airbag on the Toyota Innova Kijang Crysta
How to Replace the Steering Wheel Airbag on the Toyota Innova Kijang Crysta
Toyota Innova Kijang Crysta (2015-2023 / An140) Let's see in this brief and simple guide how to perform the removal and replacement of the steering wheel airbag on the Toyota Innova Kijang Crysta. …
How to Replace the Rear Brake Shoes on the Toyota Innova Kijang Crysta
How to Replace the Rear Brake Shoes on the Toyota Innova Kijang Crysta
Toyota Innova Kijang Crysta (2015-2023 / An140) Today, you will learn in this brief and simple guide how to disassemble and replace the rear brake shoes on the Toyota Innova Kijang Crysta. First, l…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos