Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Properly Position the Jack on the Toyota Innova Kijang Crysta

Model: Toyota Innova Kijang Crysta An140 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Checks and maintenance

See other generations:
Video tutorial

This guide provides instructions on how to properly position the jack for removing and replacing the tire with the spare on the Toyota Innova Kijang Crysta. First, open the trunk and pull out the jack located on the left side of the trunk (unscrew the screw to extract it); you will find the designated anchoring points under the vehicle, as well as inside the holes, as shown in the video.

Then, lift the vehicle and proceed with the tire replacement!


Updated on 1 June 2026 by ScegliAuto


Related tutorials

How to Replace the Steering Wheel Airbag on the Toyota Innova Kijang Crysta
How to Replace the Steering Wheel Airbag on the Toyota Innova Kijang Crysta
Toyota Innova Kijang Crysta (2015-2023 / An140) Let's see in this brief and simple guide how to perform the removal and replacement of the steering wheel airbag on the Toyota Innova Kijang Crysta. …
How to Replace the Headlight Bulb of the Toyota Innova Kijang Crysta?
How to Replace the Headlight Bulb of the Toyota Innova Kijang Crysta?
Toyota Innova Kijang Crysta (2004-2015 / An40) To replace the headlight bulb of the Toyota Innova Kijang Crysta, open the hood to access the components inside the engine compartment. Specifically,…
How to Replace the Rear Brake Shoes on the Toyota Innova Kijang Crysta
How to Replace the Rear Brake Shoes on the Toyota Innova Kijang Crysta
Toyota Innova Kijang Crysta (2015-2023 / An140) Today, you will learn in this brief and simple guide how to disassemble and replace the rear brake shoes on the Toyota Innova Kijang Crysta. First, l…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos