Do it yourself
| ||||
|
Toyota Aygo - Video tutorial
Model: Toyota Aygo
Ab40, MK 2
- Years 2014-2023 The replacement of the car radio on the Toyota Aygo is done by levering with an object, so that the plastic covering around the device can be removed: once this covering has been removed, it will be possible to extract the radio from inside its housing. Once the connectors at the back have been disconnected, it will be possible to connect the new device to the respective connectors: the radio can now be fitted inside its housing, also reinstalling the covering around the device.
Posted on 11 March 2024 by ScegliAuto
|
Frequently Asked QuestionsHandbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |