Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Radio from a Toyota Aygo

Model: Toyota Aygo MK 1, Ab10 - Years 2005-2014
Part: Car stereo

Replace the original radio if you want to fit a different model. Start by removing the central air knob (where the air numbers are), disconnect it from the centre console. Unscrew the securing screw. Once the stereo is free, you can pull it out by hand; disconnect the cables (power and antenna). Detach the radio from the dashboard plastics. Fit the appropriate adapter into the dashboard plastics, an adapter for the power terminals. Refit the centre console, connect the electrical terminals, and finally, the radio.

Updated on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Disconnect the Radio from Toyota Aygo
How to Disconnect the Radio from Toyota Aygo
Toyota Aygo (2005-2014 / MK 1, Ab10) How do you remove the radio from your Aygo? Let's look at the removal of the radio and the installation of the new one in the Toyota Aygo. Remove the…
How to Replace the Radio in a Toyota Aygo?
How to Replace the Radio in a Toyota Aygo?
Toyota Aygo (2014-2023 / Ab40, MK 2) To replace the radio in a Toyota Aygo, use a tool to pry off the plastic trim surrounding the device. Once this trim is removed, extract the radio fr…
How to Replace the Radio in the Toyota Aygo?
Toyota Aygo (2005-2014 / MK 1, Ab10) To replace the radio in the Toyota Aygo, use a flathead screwdriver to lever off the knob that adjusts the fan. Once the knob is removed, you can loo…

Other guides you may be interested in

    Frequently Asked Questions

    • Aygo 2005-2014 - What to do if the Toyota Aygo car radio buttons don't work? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos