Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the cabin air filter in the Toyota Yaris XP 90

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Cabin air filter

See other generations:
Video tutorial

To prevent dirt and dust from entering the air conditioning circuit of the Toyota Yaris, a dedicated filter is installed at the external air intake, which should be replaced after fifteen thousand miles since the last installation. Move to the passenger side, open the glove compartment, unclip the latch on the right side, close it, and grasp the bottom edge to pull upwards to unclip and remove the glove compartment.

Horizontally mounted, you will find the filter cover; open it by acting on the clip, remove the old filter element, and replace it with a new one. Refit the cover, reposition the glove compartment, and reattach the latch.


Updated on 13 October 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on a Toyota Yaris
How to Replace the Cabin Air Filter on a Toyota Yaris
Toyota Yaris (2020-2026 / MK 4) In a few simple steps, we will see how to replace the cabin air filter or pollen filter on a Toyota Yaris. First, get inside the vehicle on the passe…
How to replace the cabin air filter of the 2018 Toyota Yaris
How to replace the cabin air filter of the 2018 Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) The procedure you need to follow in order to successfully complete the replacement of the cabin air filter in your 2018 Toyota Yaris is practically i…
How to replace the air filter of the Toyota Yaris
How to replace the air filter of the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Replacing the air filter on a Toyota Yaris is a very simple and quick operation to perform independently, thanks to our short video tutorial. To repl…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos