Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Tyre Warning Light on the Toyota C-HR?

Model: Toyota C Hr Ax10, MK 1, Ax50 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tire pressure warning light

See other generations:
Video tutorial

Resetting the tyre warning light on the Toyota C-HR, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensure you have restored the correct tyre pressure according to the instructions in the manual.

Start by inserting the key and turning on the ignition, then using the directional buttons on the steering wheel, navigate to the settings menu and enter "Vehicle Settings". Next, select the "Setup" option next to the warning light icon, move the selector to "SET", and hold down the "OK" button for about 5 seconds.


Updated on 15 October 2026 by ScegliAuto


Related tutorials

Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) The steps in this guide will show you how to reset the tyre pressure monitoring system (TPMS) light on the Toyota CH-R. Before performing the reset, …
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) To reset the tyre pressure warning light on the Toyota C-HR, first inflate the tyres to the optimal pressure value: this value is indicated on the st…
Toyota C Hr (2023-2026 / MK 2) In this video, we will see how to reset the tire pressure warning light on a Toyota CH-R: turn on the instrument panel. Using the down arrow located …

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos