Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Yaris Sedan
    4. : 2013-2020 (Xp150)

Toyota Yaris Sedan Years 2013-2020 (Xp150)

Toyota Yaris Sedan (2013-2020 / Xp150)
How to replace the battery of the Toyota Yaris Sedan remote control?
As we can see in this tutorial, replacing the battery of the Toyota Yaris Sedan remote control is an extremely simple and quick operation. To do this, we will …read all…
Posted on 4 December 2023 by ScegliAuto
Toyota Yaris Sedan (2013-2020 / Xp150)
How to reset the service light on the Toyota Yaris iA?
In this tutorial, we can see how to reset the service in the Toyota Yaris iA, an extremely simple and fast operation. Before proceeding, we must have completed …read all…
Posted on 28 September 2023 by ScegliAuto
Toyota Yaris Sedan (2013-2020 / Xp150)
How to replace the headlight bulb on a Toyota Yaris Sedan.
If we have noticed that a headlight bulb on our car has burned out, in the description below we will find all the instructions and the method of execution for …read all…
Posted on 28 May 2023 by ScegliAuto
Toyota Yaris Sedan (2013-2020 / Xp150)
Where is the fuse box located in the 2016 Toyota Yaris Sedan?
In this new guide dedicated to your 2016 Toyota Yaris Sedan, we will discover together where all the various fuses of the car are located. First of all, park …read all…
Posted on 27 May 2023 by ScegliAuto
Toyota Yaris Sedan (2013-2020 / Xp150)
Aesthetic improvements for the Toyota Yaris Sedan
Some aesthetic improvements for the Toyota Yaris Sedan that can be done very easily and with very little expense (the 4,000 rupees in the video correspond to …read all…
Posted on 8 December 2022 by ScegliAuto
Bodywork (2) Key (1) -board computer (1) Checks and maintenance (1) Bearing (1) Headlight bulb (1) Antifreeze liquid (1) Fuse box (1) Outside rearview mirror (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos