Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on a Toyota Yaris Sedan

Model: Toyota Yaris Sedan Xp150 - Years 2013-2020
Part: Headlight bulb

If you notice that a headlight bulb has burned out on your vehicle, the description below provides all the instructions and methods for a proper replacement. After opening the hood, reach behind the headlight where the bulb to be replaced is located, remove and disconnect the electrical connector, then remove the rubber cover and unhook the steel clip that holds the bulb in place. At this point, take the new bulb and position it, reattach the retaining clip, then close the cover and reconnect the connector.

Updated on 29 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the reverse light bulbs in the Toyota Yaris Sedan?
How to replace the reverse light bulbs in the Toyota Yaris Sedan?
Toyota Yaris Sedan (2005-2013 / Xp90) In this tutorial, we can see how to replace the reverse light bulbs in the Toyota Yaris Sedan, a very simple and quick operation. First of all, make …
Where to Find the Fuse Box in a 2016 Toyota Yaris Sedan
Where to Find the Fuse Box in a 2016 Toyota Yaris Sedan
Toyota Yaris Sedan (2013-2020 / Xp150) In this new guide dedicated to your 2016 Toyota Yaris Sedan, we will discover together where all the various fuses in the car are located. First, par…
How to replace the remote battery of the Toyota Yaris Sedan?
How to replace the remote battery of the Toyota Yaris Sedan?
Toyota Yaris Sedan (2013-2020 / Xp150) As seen in this tutorial, replacing the remote battery of the Toyota Yaris Sedan is an extremely simple and quick operation. To do this, you will nee…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos