Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Triumph Tiger 800 XC?

Model: Triumph Tiger 800 Xc
Part: Brake pads

Video tutorial

In this tutorial, you will see how to replace the front brake pads on a Triumph Tiger 800 XC, an extremely simple and quick operation. First, position yourself in front of the brake in question, then remove the pin using a 5 mm hex key. Next, undo the two caliper mounting bolts with a 12 mm socket, separate the caliper from the fork, and remove the old pads.

At this point, clean any dirt residue present, position the replacements, and reassemble everything by following the reverse procedure.


Updated on 28 October 2026 by ScegliAuto


Related tutorials

How to replace the rear brake pads on a Triumph Tiger 800
How to replace the rear brake pads on a Triumph Tiger 800
Tiger 800 Xc Briefly, we will discover the instructions that will allow us to remove and replace the rear brake pads of the Triumph Tiger 800 motorcycle. First, m…
Battery replacement for the Triumph Tiger 800 XC
Battery replacement for the Triumph Tiger 800 XC
Tiger 800 Xc Today's procedure will show us how to disassemble and replace the battery of the Triumph Tiger 800 XC motorcycle, in simple steps. First, we put the …
How to Replace the Battery on a Triumph Tiger 800 XC?
How to Replace the Battery on a Triumph Tiger 800 XC?
Tiger 800 Xc To replace the battery on a Triumph Tiger 800 XC, insert the key into the lock located just above the number plate. This will unlock the rear of the …

How to Replace the Front Headlight on a Husqvarna 701?

To replace the front headlight on a Husqvarna 701, first loosen the screws that secure the front fairing laterally. Once the screws are loosened, you can detach the fairing and subsequently disconnect all the connectors attached inside. Once the fairing is released, loosen the screws located inside to completely detach the old headlight from the fairing. At this point, insert the new headlight, connect it and secure it with screws, then reinstall the fairing in the corresponding housing.

Watch the video!


by ScegliAuto

More videos