Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Briefly, we will discover the instructions that will allow us to remove and replace the rear brake pads of the Triumph Tiger 800 motorcycle. First, move to the rear, placing the centre stand; then unscrew the fixing screws of the brake caliper, removing the pin and pressing on the caliper piston, as shown in the video. At this point, remove the old brake pads, cleaning the caliper of any residual dirt; insert the new rear brake pads in the correct orientation, reassembling the caliper and the locking pin.

Posted on 12 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front brake pads on the Triumph Tiger 800 XC?
How to replace the front brake pads on the Triumph Tiger 800 XC?
Tiger 800 Xc In this tutorial, we can see how to replace the front brake pads on the Triumph Tiger 800 XC, a very simple and quick operation. First of all, positi…
How to Replace the Front Brake Pads on a Triumph Tiger
How to Replace the Front Brake Pads on a Triumph Tiger
Tiger 800 Xc Position the motorcycle on the rear or front stand. Remove the caliper retaining bolt and take the caliper off the wheel bracket. Use a screwdriver t…
Replacing the Coolant on the Triumph Tiger 800
Replacing the Coolant on the Triumph Tiger 800
Tiger 800 Xc This guide shows you how to bleed the cooling circuit and replace the antifreeze on a Triumph Tiger 800. First, disconnect the coolant hose; then loo…

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive. Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question. At this point, press and hold the right button once to initialise the reset, and a second time to complete it.

Watch the video!


by ScegliAuto

More videos