Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Triumph Tiger

Model: Triumph Tiger 800 Xc
Part: Brake pads

Video tutorial

Position the motorcycle on the rear or front stand. Remove the caliper retaining bolt and take the caliper off the wheel bracket.

Use a screwdriver to detach the old pads from the rear brake caliper. Clean the brake caliper thoroughly with a brush.

Fit the new pads onto the brake caliper; reattach the caliper to the brake disc. Tighten all bolts and test the braking (top up and bleed the caliper).

Perform the same operations on the other calipers on the motorcycle.


Updated on 9 March 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on a Triumph Tiger 800 XC?
How to Replace the Front Brake Pads on a Triumph Tiger 800 XC?
Tiger 800 Xc .. In this tutorial, you will see how to replace the front brake pads on a Triumph Tiger 800 XC, an extremely simple and quick operation... …
How to replace the rear brake pads on a Triumph Tiger 800
How to replace the rear brake pads on a Triumph Tiger 800
Tiger 800 Xc Briefly, we will discover the instructions that will allow us to remove and replace the rear brake pads of the Triumph Tiger 800 motorcycle. First, m…
How to Remove the Front Wheel of the Triumph Tiger 800?
How to Remove the Front Wheel of the Triumph Tiger 800?
Tiger 800 Xc To remove the front wheel of the Triumph Tiger 800, you need to loosen the central nut that secures the axle located at the base of the front fork an…

How to Set the Time on a Kymco DTX360?

To set the time on a Kymco DTX360, follow these steps. First, turn on the scooter and ensure it is in time display mode on the dashboard. Once you find this mode, press and hold the button for setting the time, located on the scooter's handlebars. After a few seconds, the display will start to flash, indicating that you can now adjust the time. Use the adjustment buttons to increase or decrease the hour until you reach the desired time. When you have set the correct time, press the time setting button again to confirm your selection. The display will stop flashing and the time will be set correctly. Be sure to consult the owner's manual for specific instructions for your Kymco DTX360 model, as the procedure may vary slightly.

Watch the video!


by ScegliAuto

More videos