Do it yourself
Frequently asked questions about cars and motorcycles
The procedure illustrated in this guide will show us how to disassemble and replace the rear brake pads of the Triumph Bonneville T120 motorcycle. First of all, we put the motorcycle on the center stand and start disassembling and removing the muffler, unscrewing all the fixing screws; then we unscrew the brake caliper screws to remove it from the disc, as shown in the video. At this point, we remove the old brake pads and replace them with new ones, first cleaning them from residual dirt; then we reassemble the braking system and the exhaust muffler.

Posted on 19 January 2025 by ScegliAuto

This video is currently unavailable

Related tutorials

Bonneville T120 In order to replace the rear brake pads of the Triumph Bonneville T120, you need to loosen the screws that secure the brake caliper to its housing, w…
Bonneville T120 To replace the exhaust on the Triumph Bonneville T120, loosen the bolt that secures the exhaust at the front of the piece, near the corresponding foo…
Bonneville T120 To replace the exhaust on the Triumph Bonneville T120, loosen the bolt that secures the exhaust at the front, near the footpeg. You will also need to…

How to Service the Piaggio Vespa GTS 300

This brief guide will illustrate the main steps to perform the routine maintenance service on the Piaggio Vespa GTS 300, replacing the engine oil and oil filter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt found under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, and hand-tighten the new one. Finally, unscrew the filler cap and top up, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos