Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear suspensions of the Triumph Street Twin

Model: Triumph Street Twin
Part: Suspension system

Video tutorial

Today we will discover the instructions that will allow us to disassemble and replace the rear suspensions of the Triumph Street Twin motorcycle, thus being able to further lower the minimum ground clearance. First of all, we put the motorcycle on the center stand and start unscrewing the suspension pins that we find on the top; we also disconnect the suspensions on the bottom to remove them, as shown in the video.

At this point, we install the new suspensions, adjusting the preload; consequently, it will be necessary to adjust and adapt the stiffness of the front forks.


Posted on 30 June 2025 by ScegliAuto


Related tutorials

How to Remove the Front Headlight on a Triumph Street Twin
How to Remove the Front Headlight on a Triumph Street Twin
Street Twin Before you start, position your Triumph Street Twin on a paddock stand. Begin by unscrewing and removing the screws that secure the front headlight t…
How to Remove the Rear Mudguard on the Triumph Street Twin
How to Remove the Rear Mudguard on the Triumph Street Twin
Street Twin This guide will show you the steps to remove and replace the rear mudguard on the Triumph Street Twin. First, place the bike on the centre stand and …
How to Replace the Spark Plug on a Triumph Street Twin
How to Replace the Spark Plug on a Triumph Street Twin
Street Twin Hello, today's guide aims to replace the spark plug on your Triumph Street Twin. Start by removing the side fairings of the motorcycle. Next, disconn…

How to Replace the Variator of the Honda PCX 125

This guide outlines the steps to remove and replace the variator of the Honda PCX 125 scooter. First, place the scooter on its centre stand and begin by removing the clutch cover by unscrewing the fastening screws. Next, unscrew the central nut of the fan and the one on the clutch bell, then remove the belt and the variator, as shown in the video. Now, install the new variator with the new rollers, reassemble the belt and the entire transmission, and finally refit the cover!

Watch the video!


by ScegliAuto

More videos